This model is 5/8 INCH (17mm) LOWER than the stock seat.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Some 2016 and all 2017 and up models have an indentation in the underside of the seat pan called a pan pocket that provides additional clearance for an electrical module that will be present on 2018 2 stroke fuel injected (TPI) models. All Seat Concepts 2016-18 KTM Complete seats DO NOT have pan pockets but will fit all models except the 2 stroke fuel-injected models.
Our LOW Foam and Cover Kit only works on models WITHOUT the pan pocket. If your stock pan has a pocket, our Complete Seat is your only LOW option. Our Standard height and Tall models are available as a foam and cover kit, for models with or without a pan pocket. Our low seat WILL NOT fit the 2 stroke fuel injected models.
(2015) 450SX Factory Edition
(2016-18) SX/SX-F/XC/XC-F (except 250SX&XC 2-Stroke)
(2017-18) SX/XC-W/EXC/XC 125-500
WILL NOT FIT:
2018 450SX-F Factory Edition
2018 250 XCW TPI
For the Six Days color scheme click HERE
Available as a Foam and Cover Kit for OEM pan or Complete Seat. The Complete Seats come assembled with an aftermarket pan and ready to ride.
Per OEM specifications, the seat bolts should be tightened NO MORE than 4 ft/lbs to prevent tightening or stripping. Over tightening can cause a failure. Cross threading can also be an issue and should be avoided. DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.